A place where design, fun finds and family collide

DIY channel tufted headboard reveal {my son’s room}

My last post covered my plan for this DIY and today I am here to share the result! I could not be happier with how this project turned out. It wasn’t a difficult one; just a repetitive one. From cutting the foam, to cutting the fabric, to wrapping each vertical…it was just a lot of the same steps over and over times 10 making this a totally doable project. Just be sure to turn on some good music to get you through.

Lets recap real quick the items I used for this project that were gifted to me by OnlineFabricStore: (continue to the end for an exclusive promo code)

3 yards of PKL Studio Exposure Granite

3- 6″x 54″ bolster rounds

2 yards batting

Other items used, include:

1/4″ plywood cut into 6″x 27″ strips (I needed 10)

staple gun/ staples

spray adhesive

strap ties ( I used 2-24″ and 2-36″)

french cleat (30″)

1/2″ wood screws

Last step will be to attach the wall mounted piece from the french cleat kit. Then you can hang the masterpiece of a headboard you just made! Are you ready to see Greyson’s new headboard?!!!!

Thank you OnlineFabricStore for gifting me the supplies to create this headboard for my son. Now if you, too, are thinking of starting a project and need supplies Receive 15% off all Online Fabric Store orders $75+ ($50 max savings). Enter code EMERSON15OFS at checkout and save! Offer ends 3/22.

SHARE:


0 comments so far.

Leave a Reply

Your email address will not be published.